Chopping board with your own hands in 5 steps

U.S Retail Stores List of United States Retail Stores and Nonstore

Chopping board with your own hands in 5 steps

Chopping board with your own hands in 5 steps
Making a cutting board is not that difficult. Let this be your first woodworking project that you make yourself at home. Follow this guide and you will succeed.

What is a cutting board?

A cutting board is a flat surface that is used to cut food or chop it for cooking purposes. Cutting boards can be made of different materials - granite, silicone, plastic, but the highest quality ones are considered wooden - they damage knives less and will last you much longer than others. If you have the right wood, household tools, woodworking materials, you can make your own cutting board.

What is the best wood for a good cutting board?

The best option would be that wood, which will have fewer pores, will be strong enough and hard. Teak, beech, walnut, maple are all good enough options for a cutting board. At the same time the cutting board will also turn out with a beautiful pattern. Try not to use porous woods (such as soft pine) because water and bacteria can easily cause warping and mold if they get inside. Bamboo cutting boards can be very beautiful, but it is a common belief among cooks that they will ruin your knife much faster than any other wood.

8 materials that can be used to make a cutting board

You don't need anything too complicated to make a cutting board at home. Let's list everything that might come in handy:
  • Saws - you'll need an end saw and a table saw so that you can cut your lumber.
  • Lumber - several different pieces of hard, non-porous wood. For a cutting board, you will need to glue several 1.5-inch square pieces together.
  • Wood glue - glue will help you glue all these pieces together.
  • Bar clamps - These clamps are needed to keep the pieces of wood pressed together while the glue dries.
  • Hand planer - Useful for sanding your cutting board to a uniform smoothness and thickness.
  • Sandpaper - After you finish your project, you'll need to sand the surface.
  • Oil - To protect your cutting board from any bacterial or food contamination - you'll need mineral food grade oil.
  • Gloves and safety glasses - if you don't want to see cuts on your body while working, or don't want debris and wood dust to get in your eyes - you'll need to get gloves and safety glasses. They should be used on every woodworking project.

How to make a cutting board

Here are step-by-step instructions to help you make a DIY cutting board:
  • Preparing the wood. Put on gloves and safety glasses, cut a piece of wood (16 inches long and about 1.5 inches thick), and work with a planer to give the wood a smooth finish. Depending on which design you choose - pick up different or identical pieces of wood to make a pattern appear on the cutting board. It is advisable to make the board a little larger than the size you originally want, so that if anything, you can sand or trim it without compromising your original plans for size.
  • Lay out the pattern. Lay out all the pieces side by side. See how they would look together, combine different shades and textures to choose an interesting design. Before you start assembling, this will be your last chance to change the design.
  • Start gluing. When the design is ready to be glued together, lay newspapers under the workbench so you don't get anything dirty. Apply some glue to the wood, using a special glue brush. You will also need three or two clamps so that you can hold the boards in place after you glue them together. Run a damp cloth over the surface to get rid of any excess glue. Let the board stay to dry overnight.
  • Cut the board to shape. When you get rid of the excess glue and the board is dry, you can remove the clamps. Take a jigsaw (or band saw) and get rid of the rough edges. If you want more rounded edges - then you can run a jar or tumbler around the corners and cut the ends off at right angles.

Oil and sand your finished cutting board. After you sand it (with sandpaper), choose what you will finish the wood with. You want the product to penetrate into the fibers, not just create an outer protective liner. Before treating, wipe the board with mineral oil (or you can use paraffin oil) and afterwards coat it with beeswax.

How to take care of a cutting board. 4 tips

If you take good care of your cutting board, it will last you a long time.

After you have used the board - clean it well. Wash it with a soapy solution and don't let it end up in the dishwasher. The board (as well as wooden spoons and salad bowls) reacts very badly to warm water, it can lose its original shape. After you have washed it, wipe it down with a clean cloth or paper towel. Some people use a mild food bleach, but unless you want to discolor your board over time, don't use it.

Lemon juice will help remove unwanted odors. If your board starts to smell, use baking soda mixed with lemon juice. You can also wipe the board with white vinegar or fresh lemon.

Instead of oil, you can use a wood conditioner. It's great for treating the board instead of coconut oil, spray oil, or vegetable oil. You can buy your board cream at almost every kitchen supply store.

Was this article helpful? Yes -0 No -069 Posted by: 👨 Marie M. Barbosa
Wait 20 seconds...!!!